Overview
Striker
This style may not reveal (strike to) its target color until fired.
Reactive Potential
Contains: Lead (Pb) and Silver (Ag)
May React With: Sulfur (S) / Selenium (Se)
Forms of Glass
Rod (-0576)
Detailed Information
About 001701 Rod
Cold Characteristics
Clear.
Working Notes
Torch: A reducing glass that can develop a metallic sheen with an amber cast. Begin by working 001701-0576 in a neutral flame. When ready to develop a metallic sheen, the glass should be relatively cool (no visible heat) and stable on the mandrel. Create a reduction atmosphere by turning the propane (fuel) up and watch for the surface of the glass to become metallic. Once this has happened, the piece should be put into an annealing kiln. This is a finishing step. If the metallic surface is reintroduced to a neutral flame, it will dissipate. It can be brought out again by returning it to a reduction atmosphere. When molten, this glass has a low viscosity, and can be quite soft, which may result in a blurred edge where it meets other glasses. In addition, the process of reducing the glass can cause a metallic sheen over areas of glass immediately adjacent to this style.
Kiln: Not recommended for kilnforming.
Other: 001701-0576 is a relatively heavy glass, and there are 14 rods per pound (compared with 18-20 rods per pound for most other styles). Labeling is encouraged, because 001701-0576 stays deceptively clear until reduced.
Lustre rods are not part of the Bullseye Compatible line for kilnforming and are formulated solely for flameworking with Bullseye rods. We advise labeling all lustre glasses.